Your Kappa Sig Engraved Fellowship Glass at a Glance
The Kappa Sig Engraved Fellowship Glass is a 15-ounce laser-engraved drinkware piece that celebrates your fraternity bond. It's designed for everyday use or special gatherings, but like any personalized glassware, it benefits from a little care to keep the engraving sharp and the glass clear.
This guide covers what we know from the product details and offers practical advice for washing, storing, and displaying your glass. Since the catalog doesn't include specific care instructions, we'll focus on general best practices for engraved glassware.
What the Catalog Confirms About This Glass
- Kappa Sig Engraved Fellowship Glass: Fill this laser-engraved glass with 15 oz. of your favorite beverage and raise it in honor of your fraternity, your brothers, and your years together. The 15 oz. capacity makes it a versatile glass for beer, water, soda, or mixed drinks. The laser engraving is permanent but can be affected by harsh washing methods, so gentle care is recommended.

Kappa Sig Engraved Fellowship Glass
How to Hand Wash Your Fellowship Glass
The catalog does not specify dishwasher safety for this glass. To protect the engraving and prevent clouding, hand washing is the safest choice.
- Rinse immediately after use: Rinse the glass with warm water to remove residue before it dries. This prevents stains and makes cleaning easier.
- Use mild dish soap and a soft sponge: Apply a small amount of mild dish soap to a soft sponge or cloth. Avoid abrasive scrubbers or steel wool, which can scratch the glass and dull the engraving.
- Wash gently, focusing on the engraving area: Clean the inside and outside with gentle circular motions. For the engraved area, use extra care to avoid trapping soap residue in the etched lines.
- Rinse thoroughly with warm water: Ensure all soap is removed, especially from the engraving. Residual soap can leave a film that obscures the design.
- Dry with a lint-free cloth: Use a soft, lint-free cloth to dry the glass immediately. Air drying can leave water spots that are harder to remove.
Displaying Your Engraved Glass
The Kappa Sig Engraved Fellowship Glass makes a great display piece on a shelf, desk, or bar cart. When displaying, keep it away from direct sunlight for extended periods, as UV rays can cause the glass to develop a slight haze over time. A spot where it can be seen but not easily knocked over is ideal.
If you're displaying the glass alongside other fraternity memorabilia, consider using a small glass stand or a shelf with a lip to prevent accidental falls. The 15 oz. size is substantial enough to stand out without taking up too much space.
Storing Between Uses
When not in use or on display, store the glass upright in a cabinet with enough space between other glassware. Stacking glasses inside one another can cause scratches or chips, so it's best to keep them separate. If you must store it in a box, wrap it in a soft cloth or bubble wrap to protect the engraving.
Avoid storing the glass in a damp or humid environment, as moisture can promote mold or mildew on the surface over time. A dry, room-temperature cabinet is ideal.
What the Catalog Does Not Tell You
The catalog does not confirm whether this glass is dishwasher safe, microwave safe, or freezer safe. It also does not specify the glass type (e.g., tempered, soda-lime) or its resistance to thermal shock. For these reasons, we recommend treating it as hand-wash only and avoiding extreme temperature changes, such as pouring hot liquid into a cold glass or placing it directly into a freezer.
If you have specific questions about durability or care, reach out to the manufacturer or retailer for more details. In the absence of confirmed instructions, a conservative approach will help your fellowship glass last for years.


